Tag Archives: best gear

China best Customized Ggg50 Ductile Iron Cast Gear Box Housing for Tractor wholesaler

Product Description

 

General Products      
 Application/Service Area
 
Metal Parts Solution for Vehicle, Agriculture machine, Construction Machine, transportation equipment, Valve and Pump system, Agriculture machine metal Parts, engine bracket, truck chassis bracket, gear box , gear housing , gear cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains etc.
 
 Main blank Process for Casting  
Sand Casting , Resin Sand Casting, Green Sand Casting, Shell Molding, Automatic Molding, Lost Wax Casting, Lost Foam Molding Casting
 
 Blanks Tolerance -Casting  Tolerance CT9-10 for  Machine Molding Process,
CT8-9 for Shell Molding and Lost Foam Molding Casting Process
CT10-11 for Manual Molding Sand  casting Process
 Applicable Material  
See Table Below (Ductile Iron Casting, Grey Iron Casting)
OR According to customer requirement
 
 Casting Blank Size  /Dimensions 2 mm-2000mm / 0.08inch-79inch  for casting iron, according to customer requirement
 Casting Blank Weight Range from 0.01kg-1000kg for foundry sand casting
 Applicable Machining Process  
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming /Grinding/Honing and  etc.
 
 Machining Tolerance From 0.005mm-0.01mm-0.1mm
 Machined Surface Quality Ra 0.8-Ra3.2, according to customer requirement
 Applicable Heat Treatment  
Normalization , annealing, quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 
 Applicable Finish Surface  Treatment  
Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting.
 
 MOQ For iron casting : 100pcs
For Machining : 50pcs
 Lead Time 45days from the receipt date of deposit for Cast Gear Box Housing

 
Ductile Iron Casting Material Comparison Table:

Cast iron with nomular graphite
DIN EN 1563
Germany
DIN 1693
France
NF
Great Britain
BS
Netherlands
NEN
Sweden
MNC
USA
ASTM A536
EN-GJS-350-22-LT GGG-35.3 FGS 370-17 370/17 GN 38 0571 -15 —-
EN-GJS-400-18-LT GGG-40.3     —- —- —- —- 60-40-18
EN-GJS-400-15 GGG-40 FGS-400-12 420/12 GN 42 0571 -02 60-40-18
EN-GJS-400-10 —- —- 420/12 —- —- 65-45-12
EN-GJS-500-7 GGG-50 FGS-500-7 500/7 GN 50 0727-02 65-45-12/
80-55-06
EN-GJS-600-3 GGG-60 FGS-600-3 600/3 GN 60 571-03 80-55-06
EN-GJS-700-2 GGG-70 FGS-700-2 700/2 GN 70 571-01 100-70-03
EN-GJS-800-2 GGG-80 FGS-800-2 800/2     120-90-02
EN-GJS-1000-5 (DIN EN 1564) GGG-100B/A —- —- —- —- 850-550-10
EN-GJS-AX NiSiCr35 5 2 GGG-
NiSiCr 35 5 2
FGS-
Ni35Si5Cr2
S5S —- —- Type D-5S

 
Grey Iron Casting Material Comparison Table:

Cast iron with lamellar graphite
DIN EN 1561
Germany
DIN 1691
France
NF
Great Britain
BS
Netherlands
NEN
Sweden
MNC
USA
ASTM A48
EN-GJL-150 GG-15 Ft 15 D Grade 150 GG 15 01 15-00 20 B / 25 B
EN-GJL-200 GG-20 Ft 20 D Grade 180/220 GG 20 01 20-00 25 B / 30 B
EN-GJL-250 GG-25 Ft 25 D Grade 220/260 GG 25 01 25-00 35 B / 40 B
EN-GJL-300 GG 30 Ft 30 D Grade 300 GG 30 01 30-00 40B / 45 B

 
 


Products shown here are made to the requirements of specific customers and are illustrative of the types of manufacturing capabilities available within CHINAMFG group of companies.
Please send us your detailed drawing/ sample/requirements for us offering a reasonable quotation to you and we will trying our best to make the goods in good quality and delivery in time .
MATECH policy is that none of these products will be sold to 3rd parties without written consent of the customers to whom the tooling, design and specifications belong.

 

Sand casting mfg. process
 

Pattern Design -> Pattern Manufacture -> Pattern Test -> Qualified Sample -> Mass Production -> Sand Shakeout -> Polishing -> Sand Blasting -> Surface Treatment (panting) -> CNC machining -> Inspection -> Clearning & Anti-rust -> Packing & Shipping QC System: raw material inspection, FAI, IPQC, random inspection, final full inspection before shipping. Standard: ANSI , ASME, DIN, BS, JIS, ASTM, GB etc.

 

Casting Parts Advantages

1.Wide suitability.The metal casting process almost free from the restrictions of the size, thickness and shape of castings, casting wall thickness can be up to 0.3-1000 mm, the length varies from a few millimeters to 10 meters, and the quality can be from a few grams to more than 300t. 2.With a higher specific pressure, the dimensional accuracy and surface finish of the castings are higher. 3.The whole line has a high degree of automation. The operator only needs to control the button base to check the production line. The labor intensity is low, there is no shock during the production process, and the noise is low. 4.High production efficiency, generally up to 450 type/hour or more, simple equipment matching and few failures. 5.Good economy, no sand box, few auxiliary machines, and low daily maintenance.



Technical Support:
ZheJiang CHINAMFG is professional at independent development and design. Our engineers are skilled at AUTO CAD, PRO ENGINEER, CHINAMFG WORKS and other 2D & 3D softwares. We are able to design, develop,produce and deliver your PO according to your drawings, samples or just an idea. Dural control of standard products and OEM products.

Quality Control:
1) Checking the raw material after they reach our factory——- Incoming quality control ( IQC)
2) Checking the details before the production line operated
3) Have full inspection and routing inspection during mass production—In process quality control(IPQC)
4) Checking the goods after they are finished—- Final quality control(FQC)
5) Checking the goods after they are finished—–Outgoing quality control(OQC)

Company Profile

MATECH Industry Ltd

We specialize in custom metal parts for Mechanical Parts,industry machine parts, Agricultural machinery parts, building materials, auto cars accessaries, medical facilitiy, solar energy system, exhibition, assembly line etc. Providing one-stop service (extrusion+ heat treatment + machining + surface treatment), to save time and costs and reduce risk of quality control for you. With keeping manufacturing process design, quality plHangZhou, key manufacturing processes and final quality control in house, we are mastering key competence to supply quality casting iron parts to our customers for both China and Export Market. During the early involvement of the customer’s design process we are able to provide professional input to our customers in terms of process feasibility, cost reduction and function approach. You are welcome to contact us for technical enquiry and business cooperation.

Our Vision: Keeping Continuous improvement on technology and engineering innovation, becoming a strong, stable and high competence top metal working supplier in 1 of our business sections with focus on Vehicle and Manufacturing Industries and continuously satisfy our customers.

Our Core Value Sincerity Quality Competence

Send Inquiry>>>

Why Choose Us ?

1. One stop service:
We have 5 own factories and 50+ sub-contractors located in different areas of China to offer you one-stop manufacturing and purchasing services to help you save time and reduce procurement cost.
2. Your eyes in China:
Our commitment to quality permeates from quoting, scheduling, production, inspection to deliver into your warehouse, our QC team will remark the errors if has on QC documents for your checking before delivery as your 3rd party.
3.Your R&Dconsultant:
With professional engineers team and 29 years manufacture experience ,we would help you work out problems during new parts’ development, optimize design and recommend the most cost-effective solution.
4. Your Emergency Solver:
With continued grown factories team and our QC teams located in different areas, if customers need to expedite the delivery, we would be able to adopt another factory to produce together immediately.
5. Quality Guaranty:
No matter how long time the products delivered, we are responsible for the quality. In case the products be rejected, we would replace them or return fund according to your demand without hesitatio.

Our Team


Our Advantages

 

1. We are a professional OEM manufacturer.
2. We have experienced engineers and quality control team as our strong backing.
3. High quality, competitive price, quick response is our mission.
4. Professional technical support
5. Agreed delivery time
6. Strict quality control process
7. Cost-Effective
8. Rich experience in mould design and production.

9. ISO/ERP system guarantee.

 

Our Services & Strength

ISO 9001:2008 certified CNCT utilizes ongoing employee training, automation, continuous process improvement and innovation to maximize the quality, reliability, and cost-effectiveness of your components.
Parts are carefully examined throughout the production process at multiple quality control checkpoints and all shipments are thoroughly tested and inspected before they are released to your facility. As a result, our team has been able to consistently maintain a nearly 0% external part reject rate that has enabled many of our customers to eliminate the costly and time eroding process of inbound part inspection.
Skilled craftsmen, with years of specialized knowledge and understanding, fabricate parts to specified tolerances. At CNCT, we’re confident that we offer a far more cost-effective and low-risk solution than our competitor. So when the success of your business depends on the ultimate in quality control, precision, timeliness, and service, you can trust your metal working needs to CNCT.

Our Package :

Inner Packing →Strong & waterproof plastic big is packed inside, to keep the product in safe condition.
Or as customer requests.

Outer Packing →Multilayer wooden box with strong bandages, used for standard export package.
Or customized as per customer’s requirements.

               You are welcome to contact us for technical enquiry and business cooperation.

FAQ:
1. Are you a manufacturer or a trading company?
We are a professional manufacturer with over 15 years’ export experience for designing and producing vehicle machinery parts.

2. How can I get some samples?
If you need, we are glad to offer you samples for free, but the new clients are expected to pay the courier cost,
and the charge will be deducted from the payment for formal order.

3. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or 3D cad model. If the 3D cad model can be supplied,
the development of the tooling can be more efficient. But without 3D, based on 2D drawing we can still make the samples properly approved.

4. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings for tooling making.

5. What’s your quality control device in house?
We have spectrometer in house to monitor the chemical property, tensile test machine to control the mechanical property and UT Sonic as NDT checking method to control the casting detect under the surface of casting.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Chemical Hardening Sand
Casting Method: Directional Crystallization
Sand Core Type: Resin Sand Core
Application: Agricultural Machinery Parts
Machining: CNC Machining
Material: Iron
Samples:
US$ 1.45/kg
1 kg(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agricultural gearbox

Technological Advancements in Agricultural Gearbox Design

Advancements in agricultural gearbox design have significantly improved the efficiency, durability, and performance of farming equipment. Here are some notable technological advancements:

  • Materials and Manufacturing: The use of advanced materials, such as high-strength alloys and composite materials, has enhanced the durability and longevity of gearbox components. Precision manufacturing techniques, including computer-aided design (CAD) and computer numerical control (CNC) machining, ensure tight tolerances and reliable performance.
  • Gear Tooth Design: Modern gear tooth profiles, such as optimized helical and spiral bevel gears, reduce noise, vibration, and wear. Advanced tooth design also improves power transmission efficiency and load distribution.
  • Sealing and Lubrication: Improved sealing technologies, such as double-lip seals and labyrinth seals, help prevent contaminants from entering gearboxes while retaining lubricants. Advanced lubrication systems, including automatic lubrication and improved oil formulations, extend maintenance intervals and enhance efficiency.
  • Electronic Controls: Agricultural gearboxes increasingly integrate with electronic control systems. Sensors and actuators provide real-time data on gearbox performance, allowing for condition monitoring, predictive maintenance, and adjustments to optimize machinery operation.
  • Smart Gearboxes: Some agricultural gearboxes are equipped with smart features, such as load sensors, temperature monitors, and feedback systems. These features enhance precision, safety, and overall equipment performance.
  • Hybrid Power Transmission: Integration of hybrid power transmission systems, combining internal combustion engines with electric motors, allows for more efficient power delivery and reduced fuel consumption. Gearboxes play a crucial role in managing power distribution in these systems.
  • Reduced Environmental Impact: Advancements in gear design contribute to reducing environmental impact. Quieter and more efficient gearboxes minimize noise pollution and energy consumption while meeting emissions regulations.
  • Customization and Modularity: Some modern agricultural gearboxes offer modular designs that allow farmers to customize gear ratios, output speeds, and other specifications to match specific tasks and conditions.
  • Simulation and Testing: Computer simulations and advanced testing methods, such as finite element analysis (FEA) and computational fluid dynamics (CFD), help optimize gearbox design, reduce prototyping costs, and ensure reliability before production.

These advancements collectively contribute to the evolution of agricultural gearboxes, making farming machinery more efficient, environmentally friendly, and adaptable to the changing needs of modern agriculture.

agricultural gearbox

Common Signs of Gearbox Wear and Their Solutions

Gearboxes, like any mechanical components, can experience wear over time due to factors such as friction, load, and operating conditions. Recognizing the common signs of gearbox wear is essential for timely maintenance and avoiding potential breakdowns. Here are some signs to watch out for and the solutions to address them:

  • Unusual Noises: Grinding, clicking, or whining noises during operation can indicate worn gears or bearings. Inspect the gearbox for damaged teeth or inadequate lubrication. Replace damaged components and ensure proper lubrication.
  • Increased Vibration: Excessive vibration suggests misalignment or imbalance within the gearbox. Check for proper alignment and balance the components if necessary. Also, inspect for worn or damaged shafts or bearings.
  • Leakage: Oil or lubricant leaks may indicate worn seals or gaskets. Replace seals and gaskets to prevent leakage and ensure adequate lubrication.
  • Slipping Gears: Gears slipping out of engagement or difficulty shifting can point to worn or damaged gear teeth. Inspect gears for signs of wear or chipping, and replace as needed.
  • Temperature Increase: Abnormal heat generation can result from increased friction due to worn parts. Check lubrication levels and quality, and replace worn bearings or gears causing excess friction.
  • Decreased Performance: Reduced power transmission or output efficiency can indicate wear in the gearbox. Inspect gears, bearings, and other components for signs of wear and replace as necessary.
  • Excessive Play: Excessive play or backlash in gears can indicate worn gear teeth or bearings. Inspect components for wear, adjust backlash, and replace worn parts.

Addressing gearbox wear requires routine maintenance, including proper lubrication, alignment checks, and regular inspections. Timely replacement of worn or damaged components can extend the gearbox’s lifespan and maintain optimal performance in various applications.

agricultural gearbox

Maintenance Requirements for Agricultural Gearboxes

Maintaining agricultural gearboxes is crucial to ensure the smooth and efficient operation of farming equipment. Proper maintenance helps extend the lifespan of gearboxes and prevents costly breakdowns. Here are the key maintenance requirements:

  • Regular Inspections: Conduct routine visual inspections to check for signs of wear, damage, leaks, or misalignment. Regularly inspect gear teeth, seals, and bearings for any issues.
  • Lubrication: Proper lubrication is essential to minimize friction and wear in gearboxes. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for lubrication.
  • Lubricant Checks: Monitor the gearbox’s lubricant levels and quality regularly. Replace or replenish lubricants as needed, and ensure that contaminants are kept out of the lubrication system.
  • Tightening Bolts and Fasteners: Check and tighten bolts, nuts, and fasteners to prevent loosening due to vibrations during operation. Loose components can lead to misalignment and premature wear.
  • Seal Inspection: Examine seals for leaks and proper sealing. Damaged or worn seals should be replaced promptly to prevent lubricant leakage and the ingress of contaminants.
  • Cleaning: Keep gearboxes clean by removing dirt, debris, and residue. Regular cleaning prevents abrasive particles from entering the gearbox and causing damage.
  • Alignment: Ensure that gearboxes are properly aligned with connected components, such as shafts and couplings. Misalignment can lead to increased wear and reduced efficiency.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox. Abnormal temperature increases may indicate issues like overloading or insufficient lubrication.
  • Filter Replacement: If the gearbox has a filtration system, regularly replace or clean the filters to prevent contaminants from entering the gearbox.
  • Expert Inspection: Periodically have gearboxes inspected by qualified technicians. They can identify potential problems that may not be visible during routine inspections.

Adhering to these maintenance requirements ensures that agricultural gearboxes remain in optimal condition and contribute to the reliability and efficiency of farming equipment. Regular maintenance not only prevents unexpected downtime but also prolongs the service life of the gearboxes, ultimately benefiting the productivity of agricultural operations.

China best Customized Ggg50 Ductile Iron Cast Gear Box Housing for Tractor   wholesaler China best Customized Ggg50 Ductile Iron Cast Gear Box Housing for Tractor   wholesaler
editor by CX 2024-02-17

China best Low Noise High Quality Cast Iron Helical Gear Box gearbox definition

Product Description

Low Noise High Quality Cast Iron Helical Gear Box

 

R SERIES
product/xteUysJGvQVq/China-R-Series-Foot-Mounted-Coaxial-Gearbox-with-Inline-Standard-Motor.html
R series: Small size, light weight, large transmission torque, superior performance, stable operation, low noise, durable, can be installed in a variety of ways, can be matched with different types of motors, a wide range of applications. sewage treatment, chemical industry, pharmacy and other industries. 

K SERIES
product/CAepOqywMEhH/China-K-Series-Hardened-Tooth-Surface-Helical-Bevel-Foot-Mounted-Gearbox-with-Inline-Standard-Motor.html
K series gearbox is 1 kind of Helical Bevel type gearbox ,it is designed based on modularization , which bring many difference kinds of combinations ,mounting types ,and structure designs .The detail classification of ratio can meet various of working condition .High Transmission efficiency ,low energy consumption, superior performance . 

S SERIES
product/laXYVUyhOxWn/China-S-Series-Foot-Mounted-Helical-Worm-Gearbox-with-Solid-Shaft-with-Inline-Standard-Motor.html
S series: right-angle speed reduction gearing composed by helical gears, worms, and gears, optimized and designed according to international standard.High precision, high efficiency, fine classification in transmission ratio, wide range, large transmission torque, reliable performance, low noise, flexible installation, and convenient use and maintenance.

F SERIES
product/wTPpMGtcvQVl/China-F-Series-Foot-Mounted-Parallel-Shaft-Gearbox-with-Inline-Standard-Motor.html
F series speed gear reducer is 1 kind of parallel shaft helical gear reducer , which consist of 2 or 3 stages helical gears (relate to gear ratio) in the same case . The hard tooth surface gear use the high quality alloy steel ,the process of carburizing and quenching, grinding .

 

Detailed Photos

 

R SERIES

 

K SERIES

S SERIES
 

F SERIES
 

 

 

Company Profile

 

< ABOUT TILI

HangZhou Tili Reducer Co, Ltd has been committed to provide High-quality hardensurface extruder gearbox since established In 2003.
Since its establishment, we always been committed to creating High-quality products in the field of transmission in China and is determined to enter the global market the high-end market of the mechanical industry is based on technology, and industry serves the country. We have strong research and development capabilities and professional production team and elite salesteam have continuously innovated, we specialize in Planetary reducer, 4 series (R, K, F, S) reducers, CHINAMFG series single screw extruder reducer, DJYG series high torque extruder reducer, cycloidal reducer, sell well in Europe, USA, Japan, India, Brazil, Southeast Asia etc.
Relying on the 20 years of industry accumulation, we hold our company’s vision of “sustainable operation”, based on quality and service, in the global competitive environment, we strive to meet customers’ quality requirements and strive for stable growth and strive for excellence.
Adhere to the principle of integrity, grow together with customers, and share with employees.
We’re pleased to get your inquiry and we will reply you as soon as possible. We stick to the principle of “Quality first, service first, continuous improvement and innovation to meet the customers” for the management and “Zero defect, zero complaints” as the quality objective.

< WORKSHOP

< QUALITY CONTROL

Certifications

 

 

 

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Agricultural Machinery, Industrial Automation Equipment, Chemical Industry
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Multiple Installation Types
Step: Three-Step
Type: Cylindrical Gear Box
Customization:
Available

|

Customized Request

agricultural gearbox

Case Studies: Successful Implementations of Agricultural Gearboxes

Several case studies highlight the successful integration of agricultural gearboxes in farming machinery:

  1. Case Study 1: Tractor Versatility

    A farm in the Midwest implemented tractors equipped with adjustable gearboxes. The gearboxes allowed the tractors to seamlessly switch between plowing, planting, and harvesting tasks. The ability to customize speed and torque ratios improved efficiency and reduced the need for multiple machines.

  2. Case Study 2: Orchard Management

    An orchard in California utilized specialized gearboxes in its mechanized harvesters. These gearboxes facilitated controlled movement and precise positioning of the harvesters among trees. The adaptability of the gearboxes enabled the harvesters to navigate the orchard’s uneven terrain while minimizing damage to trees and fruit.

  3. Case Study 3: Precision Planting

    A farm in Europe integrated precision planting machinery with gearboxes that offered adjustable gear ratios. This allowed for precise control over seed placement and depth. The gearboxes played a vital role in achieving uniform crop emergence and optimizing seed-to-soil contact.

  4. Case Study 4: Multi-Tasking Implements

    A farming cooperative in Australia utilized multi-tasking implements equipped with versatile gearboxes. These implements could seamlessly switch between tasks such as plowing, harrowing, and fertilizing. The gearboxes’ ability to manage torque and speed ratios ensured optimal performance across various tasks.

  5. Case Study 5: Soil Conservation

    A farm in Africa adopted gearboxes in its soil conservation practices. By attaching specialized implements with adjustable gearboxes to their tractors, the farm effectively controlled soil erosion and improved water infiltration rates. The gearboxes allowed for precise adjustments based on soil type and slope.

These case studies illustrate the impactful role of agricultural gearboxes in enhancing efficiency, versatility, and productivity across a spectrum of farming applications.

agricultural gearbox

Types of Farming Equipment Incorporating Agricultural Gearboxes

Agricultural gearboxes play a vital role in various farming equipment, enhancing their efficiency and enabling them to perform essential tasks. Here are some types of farming equipment that commonly incorporate agricultural gearboxes:

  • Tractors: Agricultural gearboxes are integral components of tractors, contributing to power transmission from the engine to various attachments such as plows, harrows, and mowers.
  • Harvesters: Harvesters, used to gather crops like grains, fruits, and vegetables, utilize gearboxes to drive conveyor systems and separators, ensuring smooth and efficient harvesting operations.
  • Planters and Seeders: Planters and seeders rely on gearboxes to precisely distribute seeds and fertilizers while maintaining the desired planting depth.
  • Sprayers: Agricultural gearboxes are used in sprayers to drive pumps that distribute pesticides, herbicides, and fertilizers over fields.
  • Hay Balers: Gearboxes are essential in hay balers for compacting and forming bales of hay, enabling easy storage and transportation.
  • Manure Spreaders: Manure spreaders incorporate gearboxes to distribute and spread fertilizers and compost evenly across fields.
  • Grain Augers: Grain augers, used for loading and unloading grains, feature gearboxes to drive the rotating screw mechanism that lifts and transfers grains.
  • Cultivators: Cultivators use gearboxes to drive rotating tines or blades that loosen and prepare the soil for planting.
  • Rotary Cutters: Rotary cutters, often attached to tractors, utilize gearboxes to power the spinning blades used for cutting tall grass, weeds, and brush.
  • Threshers: Threshers, employed for separating grains from their husks or stalks, incorporate gearboxes to drive the threshing mechanisms.

These examples demonstrate the diverse applications of agricultural gearboxes across a wide range of farming equipment. By providing reliable power transmission and control, agricultural gearboxes contribute significantly to the productivity and efficiency of modern agricultural practices.

agricultural gearbox

Power Transmission in Farming Equipment with Agricultural Gearboxes

Agricultural gearboxes play a vital role in facilitating power transmission within various types of farming equipment. These gearboxes are integral components that enable the transfer of rotational power from a tractor’s engine to different agricultural implements and machinery. Here’s how agricultural gearboxes contribute to power transmission:

  • Speed Reduction: In many farming operations, the engine of a tractor or other power source operates at a higher speed than is suitable for the optimal functioning of agricultural implements. Agricultural gearboxes provide speed reduction by using a combination of gears with different numbers of teeth. This reduction in speed allows the machinery to operate at the required speed for efficient tasks like tilling, planting, or harvesting.
  • Power Multiplication: Some agricultural tasks require a significant amount of torque to operate effectively. Gearboxes can multiply the input torque from the engine to generate higher torque at the output shaft. This is crucial for tasks such as plowing, where substantial force is needed to break up the soil.
  • Directional Change: Agricultural gearboxes also allow for changes in the direction of power transmission. For instance, a tractor’s power take-off (PTO) shaft may need to transmit power at a right angle to the tractor’s engine. Gearboxes with bevel gears or other arrangements enable this change in direction, ensuring that power is properly directed to the implement.
  • Power Distribution: In certain cases, power needs to be distributed to multiple components or implements. Agricultural gearboxes with multiple output shafts can distribute power to different tasks simultaneously, optimizing efficiency and productivity.
  • Attachment Operation: Many agricultural implements, such as plows, seed drills, and rotary mowers, require consistent and controlled power to function effectively. Gearboxes provide the necessary power and control to these attachments, ensuring uniform operation and accurate results.

By facilitating speed reduction, power multiplication, directional changes, power distribution, and attachment operation, agricultural gearboxes contribute significantly to the overall efficiency and productivity of farming equipment. They allow farmers to adapt their machinery to various tasks, optimize power usage, and achieve better results in different agricultural operations.

China best Low Noise High Quality Cast Iron Helical Gear Box   gearbox definition		China best Low Noise High Quality Cast Iron Helical Gear Box   gearbox definition
editor by CX 2024-02-03

China wholesaler 3 Stage Speed Reducer Hypoid Gear Transmission Helical Gearboxes with Size Tkm50-63-75-90 with Best Sales

Product Description

Product Description

KPM-KPB series helical-hypoid gearboxes are the new-generation product with a compromise of advanced technology both at home and abroad.This product is widely used in textile, foodstuff, beverage,tobacco, logistics industrial fields,etc.
Main Features:
(1) Driven by hypoid gears, which has big ratios.
(2) Large output torque, high efficiency(up to 92%), energy saving and environmental protection.
(3) High quality aluminum alloy housing, light in weight and non-rusting.
(4) Smooth in running and low in noise, and can work long time in dreadful conditions.
(5) Good-looking appearance, durable service life and small volume.
(6) Suitable for all round installation, wide application and easy use.
(7) KPM series can replace NMRV worm gearbox; KPB series can replace CHINAMFG W series worm gearbox;
(8) Modular and multi-structure can meet the demands of various conditions.
 Main Material:
(1) Housing: aluminum alloy 
(2) Gear wheel: 20CrMnTiH1,carbonize & quencher heat treatment make the hardness of gears surface up to 56-62 HRC, retain carburization layers thickness between 0.3 and 0.5mm after precise grinding.

Detailed Photos

Product Parameters

Model Information:

GEARBOX SELECTING TABLES    
KPM50..           n1=1400r/min       160Nm    
                         
Model i i n2 M2max Fr2 63B5 71B5/B14 80B5/B14 90B5/B14    
nominal actual [r/min] [Nm] [N]    
3 Stage    
KPM50C   300 294.05 4.8 130  4100   N/A N/A N/A    
KPM50C   250 244.29 5.8 130  4100   N/A N/A N/A    
KPM50C   200 200.44 7.0  130  4100   N/A N/A N/A    
KPM50C   150 146.67 9.6 160  4000   N/A N/A N/A    
KPM50C   125 120.34 12 160  3770     N/A N/A    
KPM50C   100 101.04 14 160  3560     N/A N/A    
KPM50C   75 74.62 19 160  3220     N/A N/A    
KPM50C   60 62.36 23 160  3030     N/A N/A    
KPM50C   50 52.36 27 160  2860     N/A N/A    
2 Stage    
KPM50B   60 58.36 24 130  2960     N/A N/A    
KPM50B   50 48.86 29 130  2790       N/A    
KPM50B   40 40.09 35 130  2610       N/A    
KPM50B   30 29.33 48 160  2350       N/A    
KPM50B   25 24.07 59 160  2200            
KPM50B   20 20.21 70 160  2080            
KPM50B   15 14.92 94 160  1880            
KPM50B   12.5 12.47 113 160  1770            
KPM50B   10 10.47 134 160  1670            
KPM50B   7.5 7.73 182 160  1510            
                         
                         
KPM63..,KPB63..           n1=1400r/min       180Nm    
                         
Model i i n2 M2max Fr2 63B5 71B5/B14 80B5/B14 90B5/B14    
nominal actual [r/min] [Nm] [N]    
3 Stage    
KPM63C KPB63C 300 302.50  4.7 160  4800   N/A N/A N/A    
KPM63C KPB63C 250 243.57  5.8 160  4800   N/A N/A N/A    
KPM63C KPB63C 200 196.43  7.2  160  4800     N/A N/A    
KPM63C KPB63C 150 151.56  9.3 180  4650     N/A N/A    
KPM63C KPB63C 125 122.22  12 180  4330     N/A N/A    
KPM63C KPB63C 100 94.50  14 180  4070     N/A N/A    
KPM63C KPB63C 75 73.33  20 180  3650       N/A    
KPM63C KPB63C 60 63.33  23 180  3480       N/A    
KPM63C KPB63C 50 52.48  27 180  3270       N/A    
2 Stage    
KPM63B KPB63B 60 60.50  24 160  3430       N/A    
KPM63B KPB63B 50 48.71  29 160  3190            
KPM63B KPB63B 40 39.29  36 160  2970            
KPM63B KPB63B 30 30.31  47 180  2720            
KPM63B KPB63B 25 24.44  58 180  2530 N/A          
KPM63B KPB63B 20 18.90  70 180  2380 N/A          
KPM63B KPB63B 15 14.67  96 180  2130 N/A N/A        
KPM63B KPB63B 12.5 12.67  111 180  2030 N/A N/A        
KPM63B KPB63B 10 10.50  134 180  1910 N/A N/A        
KPM63B KPB63B 7.5 7.60  185 180  1710 N/A N/A        
                         
                         
KPM75..,KPB75..           n1=1400r/min           350Nm
                         
Model i i n2 M2max Fr2 63B5 71B5 80B5/B14 90B5/B14 100B5/B14 112B5/B14
nominal actual [r/min] [Nm] [N]
3 Stage
KPM75C KPB75C 300 297.21  4.8 300  6500     N/A N/A N/A N/A
KPM75C KPB75C 250 240.89  5.9 300  6500     N/A N/A N/A N/A
KPM75C KPB75C 200 200.66  7.0  300  6500     N/A N/A N/A N/A
KPM75C KPB75C 150 149.30  9.3 350  6500       N/A N/A N/A
KPM75C KPB75C 125 121.00  12 350  5980       N/A N/A N/A
KPM75C KPB75C 100 100.80  15 350  5520       N/A N/A N/A
KPM75C KPB75C 75 79.40  19 350  5040         N/A N/A
KPM75C KPB75C 60 62.43  23 350  4730 N/A       N/A N/A
KPM75C KPB75C 50 49.18  29 350  4370 N/A       N/A N/A
2 Stage
KPM75B KPB75B 60 59.44  24 300  4660 N/A       N/A N/A
KPM75B KPB75B 50 48.18  30 300  4340 N/A       N/A N/A
KPM75B KPB75B 40 40.13  35 300  4080 N/A         N/A
KPM75B KPB75B 30 29.86  47 350  3720 N/A N/A       N/A
KPM75B KPB75B 25 24.20  56 350  3500 N/A N/A        
KPM75B KPB75B 20 20.16  71 350  3230 N/A N/A        
KPM75B KPB75B 15 15.88  93 350  2950 N/A N/A        
KPM75B KPB75B 12.5 12.49  113 350  2770 N/A N/A N/A      
KPM75B KPB75B 10 9.84  143 350  2550 N/A N/A N/A      
KPM75B KPB75B 7.5 7.48  188 350  2330 N/A N/A N/A      
                         
                         
KPM90..,KPB86..           n1=1400r/min           500Nm
                         
Model i i n2 M2max Fr2 63B5 71B5 80B5/B14 90B5/B14 100B5/B14 112B5/B14
nominal actual [r/min] [Nm] [N]
3 Stage
KPM90C KPB86C 300 297.21  4.8 450  6500     N/A N/A N/A N/A
KPM90C KPB86C 250 240.89  5.9 450  6500       N/A N/A N/A
KPM90C KPB86C 200 200.66  7.0  450  6500       N/A N/A N/A
KPM90C KPB86C 150 151.20  9.3 500  6500       N/A N/A N/A
KPM90C KPB86C 125 125.95  12 500  5980       N/A N/A N/A
KPM90C KPB86C 100 99.22  15 500  5520 N/A       N/A N/A
KPM90C KPB86C 75 75.45  19 500  5040 N/A       N/A N/A
KPM90C KPB86C 60 62.43  23 500  4730 N/A       N/A N/A
KPM90C KPB86C 50 49.18  29 500  4370 N/A       N/A N/A
2 Stage
KPM90B KPB86B 60 59.44  24 450  5890 N/A         N/A
KPM90B KPB86B 50 48.18  30 450  5500 N/A         N/A
KPM90B KPB86B 40 40.13  35 450  5170 N/A N/A        
KPM90B KPB86B 30 30.24  47 500  4710 N/A N/A        
KPM90B KPB86B 25 25.19  56 500  4430 N/A N/A        
KPM90B KPB86B 20 19.84  71 500  4090 N/A N/A N/A      
KPM90B KPB86B 15 15.09  93 500  3730 N/A N/A N/A      
KPM90B KPB86B 12.5 12.49  113 500  3510 N/A N/A N/A      
KPM90B KPB86B 10 9.84  143 500  3240 N/A N/A N/A      
KPM90B KPB86B 7.5 7.48  188 500  2950 N/A N/A N/A      

Outline Dimension:

Company Profile

About our company:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is  full range of RV571-150 worm reducers , also supplied hypoid helical gearbox, PC units, UDL Variators and AC Motors.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.

 Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia

Logistics

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other ServiceIncluding modeling selection guide, installation guide, and problem resolution guide, etc.

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Hypoid Helical Gear
Step: 2-3 Stage
Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agricultural gearbox

Contribution of Agricultural Gearboxes to Farming Machinery Versatility

Agricultural gearboxes play a pivotal role in enhancing the overall versatility of farming machinery. Here’s how they contribute:

  • Variable Speeds: Agricultural gearboxes enable machinery to operate at different speeds, allowing farmers to adapt to various tasks. For instance, tractors equipped with adjustable gearboxes can efficiently switch between plowing, seeding, and harvesting.
  • Torque Management: Gearboxes control torque delivery to match the requirements of different operations. This ensures optimal power transmission and prevents overloading during tasks like tilling or lifting heavy loads.
  • Multi-Functionality: Many farming machines are designed to perform multiple tasks. By incorporating versatile gearboxes, these machines can efficiently switch between functions without requiring major modifications.
  • Attachment Compatibility: Farm machinery often requires attachments like mowers, plows, or sprayers. Agricultural gearboxes can be designed to accommodate various attachments, increasing the machinery’s utility and adaptability.
  • Adjustable Ratios: Some gearboxes allow operators to change gear ratios on-the-fly. This adaptability is essential for tasks that demand precise control over speed and torque, such as precision planting or spraying.
  • Efficient Power Distribution: Gearboxes help distribute power from the engine to different components of the machinery, such as wheels, axles, and implements. This efficient power distribution ensures effective utilization of energy.
  • Task-Specific Optimization: Different farming tasks have specific requirements. Agricultural gearboxes can be tailored to optimize machinery performance for tasks ranging from soil preparation to crop maintenance.
  • Enhanced Maneuverability: Gearboxes can enable machinery to change directions easily and navigate tight spaces. This is especially valuable in tasks like plowing fields or maneuvering within orchards.
  • Adapting to Terrain: Versatile gearboxes allow machines to adapt to different terrains, ensuring consistent performance on various surfaces like hills, slopes, or uneven ground.
  • Seasonal Flexibility: Farming involves seasonal tasks that vary in demand and complexity. Gearboxes offer the flexibility to optimize machinery for specific tasks during different seasons, enhancing overall efficiency.

Agricultural gearboxes are a cornerstone of farming machinery versatility, enabling farmers to accomplish a wide range of tasks efficiently and effectively.

agricultural gearbox

Enhancing Efficiency and Productivity in Farming Operations with Agricultural Gearboxes

Agricultural gearboxes play a pivotal role in enhancing efficiency and productivity across various farming operations. Here’s how agricultural gearboxes contribute to improving farming practices:

  • Power Transmission: Agricultural gearboxes efficiently transmit power from the tractor’s engine to various implements, enabling them to perform tasks like plowing, planting, and harvesting with optimal power and torque.
  • Variable Speed Control: Gearboxes allow farmers to adjust the speed of attached implements, adapting to different soil types, crop conditions, and tasks. This flexibility ensures precision and optimal performance.
  • Task Specialization: With the use of different attachments and implements, one tractor equipped with a gearbox can perform a variety of tasks, reducing the need for multiple specialized machines.
  • Optimized Torque: Agricultural gearboxes provide the necessary torque to overcome resistance from tough soils, vegetation, and other challenging conditions, ensuring consistent and efficient operations.
  • Improved Crop Management: Gearboxes enable precise control over seeding depth, planting spacing, and fertilization, contributing to better crop management and higher yields.
  • Reduced Operator Fatigue: Efficient power transmission and controlled operations reduce the physical strain on operators, enabling them to work longer hours without excessive fatigue.
  • Conservation of Resources: By allowing accurate distribution of seeds, fertilizers, and other inputs, gearboxes help conserve resources and minimize waste.
  • Enhanced Harvesting: Gearboxes facilitate smooth operation of harvesting equipment, such as combines and forage harvesters, resulting in efficient gathering of crops without damage.
  • Time and Labor Savings: Agricultural gearboxes speed up tasks like plowing, tilling, and planting, enabling farmers to cover larger areas in less time, which is particularly crucial during planting and harvesting seasons.
  • Reliability and Durability: Well-designed gearboxes are built to withstand the rigors of farming environments, reducing downtime due to maintenance or equipment failure.

Incorporating agricultural gearboxes into farming equipment significantly contributes to streamlining operations, reducing manual effort, and optimizing the use of resources. As a result, farmers can achieve higher levels of efficiency, productivity, and overall farm profitability.

agricultural gearbox

Role of Agricultural Gearboxes in Agricultural Machinery

An agricultural gearbox is a specialized type of gearbox used in various agricultural machinery and equipment. It plays a crucial role in the proper functioning of agricultural equipment by transmitting power and torque from the engine to the different components that perform specific tasks in the field.

Agricultural gearboxes are designed to withstand the demanding conditions of agricultural operations, including exposure to dust, dirt, moisture, and heavy loads. They are commonly used in a wide range of agricultural machinery, including tractors, combines, tillers, sprayers, and more.

The primary functions of agricultural gearboxes include:

  • Power Transmission: Agricultural gearboxes transmit power from the engine to various components, such as wheels, blades, and belts, enabling them to perform their respective tasks.
  • Speed Control: Gearboxes allow operators to control the speed and output torque of agricultural machinery. Different tasks require different speeds and levels of torque, and gearboxes provide the necessary adjustments.
  • Direction Change: Many agricultural operations require changing the direction of rotational motion. Gearboxes enable smooth and efficient direction changes without the need for complex mechanical arrangements.
  • Adaptation to Tasks: Agricultural gearboxes are equipped with various gears and shafts that can be configured to match the requirements of specific tasks, such as plowing, planting, harvesting, and more.

These gearboxes come in different configurations, such as straight-cut gears, helical gears, and planetary gears, depending on the specific application and requirements. The choice of gearbox type, gear ratio, and design factors contribute to the overall performance, efficiency, and durability of agricultural machinery.

Regular maintenance and lubrication are essential to ensure the longevity and reliable operation of agricultural gearboxes. Proper care and upkeep help prevent premature wear and damage, ensuring that the machinery performs optimally throughout the farming seasons.

China wholesaler 3 Stage Speed Reducer Hypoid Gear Transmission Helical Gearboxes with Size Tkm50-63-75-90   with Best Sales China wholesaler 3 Stage Speed Reducer Hypoid Gear Transmission Helical Gearboxes with Size Tkm50-63-75-90   with Best Sales
editor by CX 2023-11-29

China manufacturer ED2090 Gear Reducer ED Et Ec Em Eqswing Drive Planetary Riduttori CZPT Gearbox with Best Sales

Product Description

Gear Reducer Swing Drive Planetary CHINAMFG Riduttori Gearbox  
ED2067 ET3067 EC3067 EM1090 EC2090 EC3090 EC4090 ED2090 ET3090 EQ4090 EC2091 
EM1150 ED2150 ET3150 EQ4150 ED2155 ET3155 EC3155 EM1250 ED2250 ET3250 EQ4250
EC2250 EC3250 EC4250 ED2255 ET3255 EQ4255 EC3255 EC4255 ED2320 ET3320
A progressive selection of sizes from 1,000 Nm to 19,000 Nm nominal torque.
– Coaxial versions with up to 4 gear stages for ratios from 1:3 to 1:3000.
– Right angle versions with up to 4 gear stages for ratios from 1:10 to 1:3000.
– Output versions: flanged gearbox with female shaft, or shaft mounted with shrink disk or direct coupling; flanged gearbox with male shaft; foot mounted version.
– Input versions with high speed shaft, provision for electric and hydraulic motors, and multiple disc brake options.
– A vast range of input and output options and standard accessories.
 

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Soft Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Type: Planetary Gear Reducer
Customization:
Available

|

Customized Request

agricultural gearbox

Considerations for Heavy-Duty Farming Gearboxes

Heavy-duty farming applications require robust and reliable gearboxes that can withstand high loads, harsh conditions, and frequent use. Here are the key considerations for selecting gearboxes for heavy-duty farming:

  • Load Capacity: Heavy-duty gearboxes must have a high load-carrying capacity to handle the demands of agricultural machinery, such as tillers, plows, and combines.
  • Material Durability: Gearboxes should be constructed from durable materials, such as hardened steel or cast iron, that can withstand the stresses and impacts associated with heavy-duty tasks.
  • Sealing and Protection: Effective sealing and protection mechanisms, such as robust seals and gaskets, prevent the ingress of dirt, water, and contaminants that can cause premature wear and damage.
  • Lubrication System: A reliable and efficient lubrication system is crucial for heavy-duty gearboxes to ensure proper lubrication of components under high loads and temperatures.
  • Heat Dissipation: Heavy-duty applications generate significant heat. Gearboxes should have efficient heat dissipation mechanisms, such as cooling fins or oil coolers, to prevent overheating and maintain performance.
  • Design and Construction: Gearbox design should incorporate reinforced housing, larger bearings, and robust gears to handle heavy loads without compromising structural integrity.
  • Alignment and Mounting: Proper alignment and mounting are essential to ensure smooth and efficient power transmission. Misalignment can lead to increased wear and reduced gearbox lifespan.
  • Maintenance Accessibility: Heavy-duty gearboxes should be designed for easy maintenance access. Features such as removable covers and inspection points simplify servicing and repairs.
  • Compatibility: Gearboxes should be compatible with the specific machinery and tasks they will be used for. Customizable gear ratios and output shaft configurations enhance versatility.
  • Reliability and Longevity: Heavy-duty gearboxes should be built to last, with quality craftsmanship and components that can withstand the demanding conditions of agricultural operations.
  • Safety: Safety features, such as guards and emergency shutdown mechanisms, are essential to protect operators and nearby personnel from potential hazards.
  • Environmental Considerations: Gearbox designs should consider environmental regulations and emissions standards to minimize the impact on the environment.
  • Cost-Effectiveness: While heavy-duty gearboxes require a higher upfront investment, their durability and performance contribute to long-term cost-effectiveness by reducing downtime and the need for frequent replacements.

By carefully considering these factors, farmers can select the appropriate heavy-duty gearboxes that enhance productivity and reliability in their farming operations.

agricultural gearbox

Potential Challenges in Maintenance and Repairs of Agricultural Gearboxes

Maintenance and repairs of gearboxes in agriculture can pose several challenges:

  • Harsh Environments: Agricultural machinery operates in challenging environments with exposure to dirt, debris, moisture, and varying temperatures. These conditions can accelerate wear and corrosion, necessitating frequent maintenance.
  • Heavy Workloads: Gearboxes in farming equipment often handle heavy workloads, leading to increased stress on components. This can result in faster wear and tear, requiring more frequent inspections and part replacements.
  • Accessibility: Some gearboxes are located in hard-to-reach areas of machinery. This makes regular maintenance and repairs more challenging, as technicians may need specialized tools and equipment to access and service the gearboxes.
  • Specialized Knowledge: Proper maintenance of agricultural gearboxes requires specialized knowledge and skills. Inadequate understanding of gearbox mechanics and maintenance practices can lead to improper repairs, reducing the gearbox’s lifespan and efficiency.
  • Costs: Repairing or replacing gearbox components can be costly, especially for heavy-duty agricultural machinery. Farmers need to consider both the direct costs of parts and labor, as well as potential downtime during repair processes.
  • Downtime: The downtime required for gearbox maintenance or repairs can impact farming operations, especially during critical planting or harvesting seasons. Efficient scheduling and backup equipment can help mitigate this challenge.
  • Availability of Parts: Obtaining replacement parts for older or less common gearbox models can be challenging. Farmers may need to source parts from specialized suppliers, leading to potential delays in repairs.

Addressing these challenges requires proactive maintenance planning, regular inspections, proper training of maintenance personnel, and sourcing spare parts in advance.

agricultural gearbox

Key Features of a Durable and Reliable Agricultural Gearbox

A durable and reliable agricultural gearbox is crucial for the efficient operation of farming equipment and machinery. The following key features contribute to the durability and reliability of agricultural gearboxes:

  • High-Quality Materials: Agricultural gearboxes are often exposed to harsh conditions, including dust, debris, and varying weather. Using high-quality materials, such as strong alloy steels, can enhance the gearbox’s resistance to wear, corrosion, and other forms of deterioration.
  • Rugged Construction: The gearbox should have a robust and rugged construction to withstand the stresses and strains associated with agricultural tasks. Reinforced housings, precision machining, and robust seals can help prevent damage and ensure longevity.
  • Effective Lubrication System: Proper lubrication is vital to reduce friction, dissipate heat, and prevent premature wear. Agricultural gearboxes should be equipped with efficient lubrication systems that ensure all components are adequately lubricated, even during extended operation.
  • Sealing and Protection: Dust, dirt, and moisture are common challenges in agricultural environments. Effective sealing mechanisms, such as gaskets and seals, prevent contaminants from entering the gearbox and protect internal components from damage.
  • Heat Dissipation: The gearbox should be designed to dissipate heat effectively, especially during prolonged operation. Overheating can lead to lubrication breakdown and premature wear. Cooling fins and adequate ventilation can help maintain optimal operating temperatures.
  • Gear Quality and Precision: High-quality gears with accurate tooth profiles and precision manufacturing ensure smooth and efficient power transmission. Properly machined gears reduce noise, vibration, and the risk of gear failures.
  • Advanced Gear Design: Some agricultural gearboxes may feature advanced gear designs, such as helical or planetary gears. These designs offer improved efficiency, reduced noise, and increased load-bearing capacity compared to traditional spur gears.
  • Overload Protection: Incorporating overload protection mechanisms, such as shear pins or clutch systems, can prevent damage to the gearbox and other connected components in case of sudden high loads or jams.
  • Easy Maintenance Access: The gearbox should be designed with maintenance in mind. Accessible inspection points, drain plugs, and fill ports make it easier for operators to perform routine maintenance tasks.

Manufacturers often engineer agricultural gearboxes to meet these requirements, ensuring that they can withstand the demanding conditions of farming operations and contribute to the reliable performance of agricultural machinery.

China manufacturer ED2090 Gear Reducer ED Et Ec Em Eqswing Drive Planetary Riduttori CZPT Gearbox   with Best Sales China manufacturer ED2090 Gear Reducer ED Et Ec Em Eqswing Drive Planetary Riduttori CZPT Gearbox   with Best Sales
editor by CX 2023-11-15

China wholesaler Gear Ratio 15: 1 Backlash 12arc-Min Low Noise Agricultural Gearbox for 2000W Servo Motor with Best Sales

Product Description

Product Description

gear ratio 15:1 backlash 12arc-min low noise agricultural gearbox for 2000W servo motor for plasma cutting machine is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

gear ratio 15:1 backlash 12arc-min low noise agricultural gearbox for 2000W servo motor characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
 

WPG/WPGL series parameters Model number WPG/WPGL60 WPG/WPGL80 WPG/WPGL90 WPG/WPGL120 WPG/WPGL160
Rated output torque 15~39Nm 50~100Nm 50~100Nm 110~230Nm 160~600Nm
Reduction ratio L1: 4, 5, 7, 10     L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: ≤10     L2: ≤12

Detailed Photos

Product Details

Other products

Product Advantage

Compared with other reduction machines, planetary gear reduction machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics, planetary gear reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Company Profile

Factory Display

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Mechanical Equipment
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Customization:
Available

|

Customized Request

agriculturalparts

The Importance of an Agricultural Gearbox

The role of an agricultural gearbox is crucial to the production of food. They play a crucial role in agricultural equipment, and are needed at every stage of the food chain. As the population increases and the need for food rises, gearboxes are increasingly becoming a critical component of heavy-duty equipment. To maintain a high quality, agricultural gearbox, replacements must be available at a reasonable cost. In addition, they need to be easily accessible.

Bevel gearboxes

A durable bevel gearbox is a critical component of any agricultural gearbox. The mechanisms and materials used to make the device will determine its durability. Investing in a long-lasting gearbox will save you the trouble of replacing it later. Bevel gearing is one of the most common types of mechanical gearing, and its advantages are many. A durable gearbox is reliable, easy to use, and cost-effective, ensuring that you will never have to replace it.
Bevel gearboxes are available in different tooth shapes and sizes, and are typically realized with straight or helical teeth. Bevel gearboxes can be either parallel or oblique in direction, and their axes can intersect at 90 degrees. Bevel gearboxes can have opposite or parallel output shafts, and the direction of the drive and output shaft can be the same or opposite, depending on the installation.
A tractor PTO can be a powerful source of torque, but it can only transmit the same amount of torque at slower speeds. Agricultural implements, on the other hand, use chains and pulleys to transmit their torque. This type of heavy-duty gearing is essential for the heavy-duty demands that agricultural implements place on them. Although geared agricultural applications are the most common, they are not limited to agriculture. Most agricultural gearboxes are used in wheel drives and massive torque low-speed applications.
Bevel gearboxes for agricultural machinery applications have several characteristics that make them useful. A right angle gearbox, for example, is well suited for use with offset rotary fillers and hollow output shafts. It offers a reduction ratio of up to 2.44:1, has a cast-iron case, and delivers power up to 49kW. It is designed for small agricultural work, such as crop treatment, soil preparation, and cement mixers.

CZPT gearboxes

There are countless reasons why CZPT agricultural gearboxes are so important. Global population is increasing by 80 million people per year, and that demand is only expected to continue rising. In addition to a constantly growing population, cropping cycles are getting shorter, putting even more strain on farm machinery, including gearboxes. Fortunately, CZPT offers a variety of solutions to maintain and repair your equipment, from on-site repairs to storage options.
Agricultural gearboxes are essential to the cropping process, and CZPT reducers perform a variety of critical tasks. The reversing gear, for instance, helps reduce friction and increase efficiency. The reversing gear is usually made of ball bearings, and is available in various versions and power capacities. Agricultural gearboxes are essential for a number of tasks, including a tractor’s ability to pull a tiller.
In the agricultural industry, a CZPT ag-class reducer powers a beet truck’s conveyor. Its durable helical gearing and grease-purged Viton seals keep it working properly for years. CZPT Ultramite gearmotors can be used to power pilers, stackers, and hoists. They generate low speed directly and can also support high-speed pinions.
CZPT Gearbox Company is one of the world’s premier manufacturers of high-performance gearboxes. Its highly experienced engineers can reverse engineer existing designs and help you design custom gearboxes for agricultural applications. Whether your gearbox needs to be used for a tractor, a hay baler, or a grain cart, CZPT Gearbox Company can provide a solution. A CZPT agricultural gearbox will help you make the most of your farm machinery by reducing your environmental footprint.
agriculturalparts

Closed-loop seals

A closed-loop seal is an excellent alternative to desiccant breathers, which can lead to contamination. A closed-loop seal can isolate a gearbox from the atmosphere, ensuring that no moisture or contamination can enter. This is essential for the safety of the equipment. A closed-loop elastomeric seal prevents water from entering the gearbox, preventing contamination and lubrication from escaping.
These high-tech seals combine service life and reliability, enabling new breakthroughs in agriculture, infrastructure and transportation. Moreover, these high-performance mechanical drive components are an essential part of breakthroughs in industries like energy, agriculture and transportation, as well as global megatrends like digitalization. As a result, they extend the life of agricultural gearboxes. But how do these high-tech seals perform?
A closed-loop seal is critical for agricultural gearboxes, as they keep the lubricants and gases in the gearbox. They are essential for the entire food chain, as even a little bit of downtime can cut production costs. This is why a high-quality agricultural gearbox is essential for safety and easy maintenance. To ensure a high-quality, long-lasting performance, closed-loop seals should be a standard feature.
Another improvement over single-lip designs is the inclusion of a dust-lip. The outer lip of the closed-loop seal can be damaged by temperature and contaminants. Once the outer lip fails, debris will accumulate against it and under it, causing a leak and seal failure. When this happens, it’s too late to repair the seal. You’ll need to invest in a new agricultural gearbox, and you don’t want to waste money on an expensive failure.

Surface finish

An agricultural gearbox should be free of mechanical damage and casting defects. Surface finish should be as close as possible to 76. The distance between shafts and bearing housing must be within six millimeters and the surface finish should be smooth. In addition, the shaft surface finish should not exhibit any ellipticity or directional pattern. A smooth surface is comfortable to operate. In this way, it improves the quality of comfort while driving.
There are various types of gears and their surface finishes. For example, bevel gears, sun gear drive, and planetary gearbox are common in agricultural applications. The surface finish of agricultural gears varies depending on the type of material used. In certain industries, gears can be subjected to low torques and strong forces. However, in agriculture, gears are subjected to specific conditions such as dustiness and contaminated water.
Various studies have been conducted to study the effectiveness of various surface finishes. Some of these studies have focused on the quality class of honed wrought steel gears. However, results were inconsistent. It was determined that the difference in the quality class of honed wrought steel gears was less than 3%, which was within the acceptable range of errors in the assembly process. However, it remains important to note that a high quality surface finish is crucial for a high gearbox’s performance.
Stream finishing has proven to be more effective in enhancing surface finish. Compared to honing and grinding, Stream finishing produces a smooth surface that is two to four times better than conventional finishes. The benefits of this method include high-quality metal and reduced waste. The process of isotropic superfinishing makes a gearbox more efficient than other manufacturing processes. In addition, it improves the lifespan and durability of its components.
agriculturalparts

Cost

Agricultural gearboxes are critical for the production of the food we eat. With heightened food demand, a worn out gear will lead to increased equipment wear and downtime, resulting in significant losses for farmers. Agricultural gearboxes should be of high quality, as they are critical for the whole food chain. These gears can be costly to replace and can cause significant downtime, resulting in a failure to meet the demand.
To determine the cost of an agricultural gearbox, you need to compare the prices offered by different manufacturers. If you’re planning to purchase a new agricultural gearbox, look for one that’s manufactured by an authentic equipment manufacturer such as CZPT. Don’t settle for a gearbox that’s not manufactured by an OEM, as it won’t last long. Also, check the safety section of the manufacturer’s website for advice on selecting a gearbox for your needs.
China wholesaler Gear Ratio 15: 1 Backlash 12arc-Min Low Noise Agricultural Gearbox for 2000W Servo Motor   with Best Sales China wholesaler Gear Ratio 15: 1 Backlash 12arc-Min Low Noise Agricultural Gearbox for 2000W Servo Motor   with Best Sales
editor by CX 2023-07-13

China Standard Best Small 90deg Bevel Drive, Miniature Right Angle Gear Drives, Gear Box Light Duty Bevel Small Price with Good quality

Product Description

We are professional best small 90deg bevel drive, miniature right angle gear drives,gear box light duty bevel small manufacturers and suppliers from China. All small 90deg bevel drive, miniature right angle gear drives,gear box light duty bevel small will be tested and inspection reports before products shipment.
 

JTP Series Cubic Bevel Gearbox

Jacton JTP series cubic bevel gearbox is also known as cubic right angle miter gearbox, cubic 90 degree bevel gearbox, cubic miter bevel gear box, or cubic spiral bevel gear reducers. JTP series cubic bevel gearbox is a right-angle shaft type gear box of spiral bevel gears for general applications with high transmission capacity, high performance and high efficiency. 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1 gear ratios as standard. 2 way(one input 1 output), 3 way(one input 2 output, or 2 input 1 output), 4 way(two input 2 output) drive shafts as standard. CZPT shaft as standard, customize hollow shaft or motor flange to bolt an IEC motor flange. Maximum torque 1299N.m. Maximum input and output speed 1450RPM. There are 8 models: JTP65 mini cubic bevel gearbox, JTP90 cubic bevel gearbox, JTP110 cubic bevel gearbox, JTP140 cubic bevel gearbox, JTP170 cubic bevel gearbox, JTP210 cubic bevel gearbox, JTP240 cubic bevel gearbox and JTP280 cubic bevel gearbox.

JTP65 Mini Cubic Bevel Gearbox
1. bevel gear ratio 1:1
2. CZPT drive shafts diameter12mm
3. CZPT input and output shaft shafts
4. 2 way, 3 way, 4 way gearbox
5. input power maximum 1.8Kw 
6. drive torque maximum 13.5Nm
7. maximum input 156567X3, registered Capital 500000CNY) is a leading manufacturer and supplier in China for screw jacks (mechanical actuators), bevel gearboxes, lifting systems, linear actuators, gearmotors and speed reducers, and others linear motion and power transmission products. We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited manufacturer and supplier. We also have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, we consistently provide the high quality equipments to meet the customers electro-mechanical actuation, lifting and positioning needs. CZPT Industry guarantees quality, reliability, performance and value for today’s demanding industrial applications. 
Website 1: http://screw-jacks
Website 2:

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Right Angle Drives
Installation: Vertical, Horizontal, Overhung
Step: Single-Step
Type: Spiral Bevel Gearbox
Customization:
Available

|

Customized Request

agriculturalparts

Tips For Selecting the Right Agricultural Gearbox

An agricultural gearbox is an essential component of a farm machinery, such as a combine harvester. A high-efficiency gearbox ensures optimum performance, while readily available replacement parts ensure a hassle-free operation. Here are some important tips for selecting the right agricultural gearbox. You can also read about bevel and CZPT gearboxes, Closed-loop seals, and the quality of materials. You can choose from the many different brands and models available.

Bevel gearboxes

A bevel gearbox consists of a series of enclosed spiral and straight bevels that transmit rotational power through a 90-degree shaft. These gearboxes can be configured at many different angles to suit various agricultural machinery applications. For example, CZPT Gearboxes manufactures a bevel gear drive at 68 degrees that is perfect for grain cart and auger applications. It also has a 50-degree model for the same purpose.
The simplest type of bevel gearbox uses straight or helical teeth. Straight teeth make it difficult to realize small profile coverage. The ratio between the input and output shafts is generally 1:1. Bevel gearboxes with straight teeth cannot produce a high transmittable torque and are also relatively noisy. A bevel gearbox with a straight or bevelled output shaft can also be symmetrical or asymmetrical, depending on the application.
A bevel gearbox can be arranged in several ways. It can be configured to provide deflection in two or three directions. The output shafts can be at various angles: 90 degrees, 120 degrees, and 135 degrees. Depending on the size and mounting location, it can be geared for either a simple screw drive or a double-shaft arrangement. One option that is not often used is a double-helix bevel gearbox, which is typically less than half the size of a standard gearbox.
In addition to bevel gears, there are also hypoid bevel gears and spiral gears. Both types produce thrust forces that act parallel to the axis of rotation, but the spiral bevel gear produces more thrust force and a change in direction of the torque is possible. However, both types of bevel gears have their drawbacks. In order to make sure that you are choosing the best one for your needs, it’s important to choose the right one.
Agricultural machinery use bevel gears to elevate the crop. The housings of these gearboxes are usually made of closed-grain cast-iron, although larger sizes are made of SG 500/7 material. The screw, meanwhile, is made of Cr-Mo medium carbon steel that has high core strength. The nut is made of aluminum bronze and the tapered roller bearing is suitable for high-axial and radial loads.

CZPT gearboxes

If you’re a farmer, you probably know just how important the parts of your CZPT agricultural gearbox are. If the gears on your tractor start to wear out, you’ll be losing significant yields, since they’re inefficient. And if they don’t have a high gear ratio, that means higher frictional losses, which means lower quality harvests. Food industry gearboxes must meet hygiene and safety regulations as well as withstand harsh environmental conditions. Additionally, you’ll find that the machinery in your food processing plant uses food-safe coloring agents and oils.
Despite the many challenges that face gearboxes, they’re essential for efficient cropping operations. Because they’re used in almost every stage of the cropping cycle, you’ll want them to be efficient and resilient to the toughest conditions. Those conditions include high and low temperatures, operation in moist or arid environments, and safety regulations. But there are some solutions that can help you maintain your cropping cycles for longer, and avoid the need to purchase expensive, replacement gearboxes from a third-party supplier.
CZPT shaft-mount reducers, designed for beet trucks, power conveyors, and other applications, use helical gearing with hardened steel and Viton seals to resist corrosion. CZPT Ultramite gearmotors, for example, drive pilers, stacker boom swings, and hoists. These high-quality gearmotors feature a low-speed direct drive and a high-speed pinion. And all of these products can accept standard NEMA C-face motors.
Industrial gearboxes are becoming increasingly essential for power transfer applications. From automobiles to helicopters to marine vessels, industrial gearboxes provide energy efficiency and reliability for businesses. With their torque multiplication, they reduce the speed of tasks and decrease their carbon footprints. In fact, many industries today are using industrial gearboxes to improve their efficiency, reduce costs, and increase productivity. This makes these gearboxes more than just useful in the agricultural sector.
agriculturalparts

Closed-loop seals

The closed-loop seal is one of the best ways to keep the gearbox safe from water intrusion. It’s a great alternative to desiccant breathers. Although they can’t keep the gearbox underwater, they are a great option for agricultural gearboxes. In the event of an emergency, a closed-loop elastomeric seal will prevent water from leaking into the gearbox.
When it comes to agriculture, the gearbox is important to the entire food chain. Even a little downtime can mean significant production loss. This is why it’s crucial to choose a gearbox that’s easy to access and maintain. Luckily, there are some great agricultural gearbox manufacturers that make closed-loop seals that are easy to access and maintain. A quality gearbox will last for a long time and keep your production costs down.
Flange gaskets are a vital component in the gearbox flange joint. When exposed to high compressive loads over time, gaskets start failing. As a result, they lose strength and leak. Due to their importance, gasket deformation plays a significant role in sealing performance. Therefore, a detailed analysis is carried out to study how gasket thickness affects deformation and von Mises stresses.
End covers are another common agricultural gearbox component. These are a type of seal that fits into the housing bore of rotary shaft lip seals. The DMR(tm) Wheel Hub Seal protects the bearings and shafts during installation and removal. These seals are made of elastomer/sheet metal. They are excellent in high-speed, high-pressure and chemical compatibility applications.
The type of motor mounted in the gearbox also determines the longevity of the seal. A C-face motor, for example, is mounted in a gearbox with a C-face motor. The shaft must slide into the hollow bore of the gearbox without wiggle. Otherwise, the motor may cause deformation of the seal, leading to leakage. Therefore, it is important to know the specific mounting arrangement of the motor before installing a C-face motor.
Various types of rotary seals are available for tractors. Among them, CZPT V-Class Magnum Seal has a grease-filled cavity outboard of the lip seal. This cavity traps small contaminants and blocks them from reaching the lip seal. In addition, the zerk on the grease cavity ensures that the lubrication reaches the outer dust lip, reducing heat generation.
agriculturalparts

Quality of materials

A quality agricultural gearbox can make or break a farming project. A good quality gearbox is not only reliable but also sturdy and will last a long time. In addition, it can save you money. Agricultural gearboxes come in different styles to fit a wide variety of applications. If you’re looking for a high-quality gearbox that will last a long time, consider an Aline Trading P/L gearbox. Aline Trading gearboxes can handle a variety of tasks, from harvesting crops to operating agricultural machinery. They are designed to reduce input shaft speed and increase the tractor PTO speed. A 50-degree bevel gear drive is commonly used on a grain cart or a portable grain elevator.
A tractor’s gear box is made of grey cast iron. This material is machinability-friendly, wear-resistant, and vibration-dampening. The belt pulleys are usually cast iron and use two-stage processes, casting and forging. Large belt pulleys are typically made of cast iron. The brake drums’ material needs to be higher-quality to reduce vibrations. The brake drums are made of grey iron ASTM A48 Class 35.
Agricultural gearboxes play a vital role in the entire food chain. They’re an essential part of the agricultural equipment production process, and efficient gearboxes are crucial for profitable operations. In addition to being highly efficient, agricultural gearboxes need to be able to endure a variety of environmental conditions. High and low temperature extremes, operations in moist and arid environments, and safety regulations are just some of the problems that agricultural gearboxes face.
China Standard Best Small 90deg Bevel Drive, Miniature Right Angle Gear Drives, Gear Box Light Duty Bevel Small Price   with Good quality China Standard Best Small 90deg Bevel Drive, Miniature Right Angle Gear Drives, Gear Box Light Duty Bevel Small Price   with Good quality
editor by CX 2023-05-10

China ND Agricultural Gearbox for Agriculture Farm Fertilizer Organic Manure Salt Spreader Pto Gear Box Concrete Mixer with Best Sales

Item Description

Item Description

Organization Profile

In 2571, HangZhou CZPT Equipment Co.,ltd was recognized by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou metropolis(ZHangZhoug province, China), all 3 Founders are engineers who have far more than averaged thirty years of encounter. Then due to the fact the specifications of organization enlargement, in 2014, it moved to the current Xihu (West Lake) Dis. Industrial Zone (HangZhou town, ZHangZhoug province, China).

By means of our effectively-identified manufacturer ND, CZPT Machinery delivers agricultural answers to agriculture equipment producer and distributors worldwide by means of a full line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, push shafts, sheet steel, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and many others. Items can be tailored as request.

We, CZPT machinery established a complete good quality administration system and sales provider network to offer clientele with high-top quality products and satisfactory service. Our items are marketed in 40 provinces and municipalities in China and 36 countries and areas in the planet, our primary industry is the European marketplace.

Certifications

Our Manufacturing facility

Sample Place

Why decide on us?

one) Customization: With a sturdy R&D staff, and we can develop items as essential. It only requires up to 7 days for us to style a set of drawings. The production time for new merchandise is normally 50 days or less.

two) High quality: We have our possess comprehensive inspection and screening gear, which can ensure the quality of the goods.

three) Capacity: Our annual production capacity is above 500,000 sets, also, we also accept modest quantity orders, to satisfy the wants of various customer’s buy portions.

4) Provider: We concentrate on offering substantial-top quality products. Our products are in line with intercontinental requirements and are mainly exported to Europe, Australia, and other nations and locations.

five) Cargo: We are shut to HangZhou and ZheJiang ports, to give the speediest transport services.
 

Packaging & Shipping and delivery

FAQ

Q: Are you a investing business or company?
A: We are factory and providing gearbox ODM & OEM solutions for the European market place for much more than 10 several years

Q: Do you provide samples? is it free of charge or added?
A: Yes, we could offer you the sample for free of charge demand but do not pay out the cost of freight.

Q: How prolonged is your supply time? What is your phrases of payment?
A: Generally it is 40-45 days. The time could fluctuate relying on the item and the degree of customization.
For standard items, the payment is: 30% T/T in progress,harmony prior to cargo.

Q: What is the precise MOQ or price tag for your solution?
A: As an OEM business, we can supply and adapt our merchandise to a vast assortment of requirements.
As a result, MOQ and price may greatly range with measurement, materials and even more requirements For instance, pricey goods or normal products will generally have a lower MOQ. Remember to speak to us with all relevant details to get the most correct quotation.

If you have an additional issue, make sure you come to feel totally free to make contact with us.

US $10-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Straight or Spiral Bevel Gear
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:
US $10-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Straight or Spiral Bevel Gear
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:

Choosing the Right Agricultural Gearbox

There are a number of different types of agricultural gearboxes available. Some are Bevel, while others are Shaft-mounted, bearing-mounted, or CZPT gearboxes. To learn more about these different types, read on. We’ll explain how each works and what to look for in an agricultural gearbox. Alternatively, you can search for information on each type on the web. Agricultural gearboxes can be a great option for your next project.
agriculturalparts

Bevel gearboxes

Bevel gearboxes are a type of mechanical transmission system that uses enclosed spiral and straight bevel-gears to transmit rotational power. They are typically mounted on a right-angle shaft and have a wide range of horsepower and ratios. Some bevel gearboxes are designed to be installed at varying angles. For example, CZPT Gearbox provides bevel gear drives for portable grain augers, elevators, and carts.
Bevel gearboxes are the most common type of gearbox. They have a single-stage design and the beveled edges of two gears interlock to transfer torque and rotation. Bevel gearboxes have multiple advantages over other types of gearboxes. They are also more cost-effective, run quietly, and produce less transmittable torque. They are designed to be used in low-torque applications.
A right-angle gearbox is used for a variety of agricultural applications. It is well-suited for use with offset rotary fillers and hollow output shafts. It has a reduction ratio of 2.44:1. The gearbox is built with a cast-iron case and can produce power rates up to 49kW. These bevel gearboxes are used in small agricultural work, including crop treatment, soil preparation, and cement mixers.
Spiral and straight bevel gears have two major benefits. The first is more durable, while the latter is quieter. Both types have their advantages and disadvantages. Bevel gears can be noisy, so they may not be the best choice for your equipment. But the latter has many benefits. The Spiral bevel gear has a high degree of total coverage, but it costs more to produce.

Shaft-mounted

Shaft-mounted agricultural gearboxes are designed for conveyer systems. These devices have interchangeable mounting dimensions with CZPT and CZPT gearboxes. Agricultural gearboxes are critical to the entire food chain. Worn gears can cause significant loss to farmers. As a result, it is essential to purchase high-quality gearboxes for your farm equipment. The following are some tips to choose the right gearbox for your needs.
Agricultural tractors include an internal combustion engine 10 and a speed change gearbox. The engine’s cylinder block is mounted on the gearbox casing. The gearbox casing extends under the driver’s position and has an elongated shape in the longitudinal direction. The gearbox casing is connected to the rear axle casing 15 by a connecting shaft. The shafts are designed to engage and disengage in opposite directions.
The mounting position of the gearbox is an important consideration. Some applications require no foundation for the gear drive. Generally, a shaft-mounted agricultural gearbox can be attached to the drive equipment via a low-speed shaft. In addition, the shaft is secured around a solid shaft. Rigid flange couplings may be used to connect the gear drive and driven equipment. This type of mounting is preferred for applications where there is no foundation.
Shaft-mounted agricultural gearboxes are designed to optimize machine performance. CZPT Gearbox Company is an innovative company that manufactures top-quality gear drives for a variety of agricultural machinery. They can reverse engineer existing designs or create custom gearboxes for your farm machinery. These agricultural gearboxes are designed to help farmers optimize their machines for maximum efficiency. They transmit power from the input shaft to the output shafts and facilitate change of speed, direction, and rotation.
agriculturalparts

Shaft-mounted with bearings

If you are looking to buy an agricultural gearbox, it will be beneficial to look at the different types of shaft-mounted gearboxes available. Shaft-mounted gearboxes are often made of steel, and are commonly constructed with AGMA class 12 gearing. They typically utilize tapered roller bearings on all shafts, and have a patented triple seal system that prevents dirt and moisture from getting inside. Additionally, they are easy to install and remove, as they don’t require any tools. Finally, they are built to last with minimal maintenance, and will provide maximum uptime.
Shaft-mounted agricultural gearboxes are generally made of steel, and are available in both cylindrical and square shapes. Some types of shafts are able to rotate axially within the bearing while maintaining radial load carrying capabilities. Despite the differences in the shapes of these shafts, they offer high levels of efficiency and performance. For example, the Float-A-Shaft(r) 3 to 2 right-angle gearbox can accommodate both round and square-base mounting, and is capable of generating up to 1100 in-lbs of torque.
Shaft-mounted agricultural gearboxes are constructed from two types of roller bearings: cylindrical roller bearings and tapered roller bearings. A cylindrical roller bearing has one row of balls that are enclosed within a cage, and it has a single axis. The other two rows of bearings have a single or double-row arrangement. Both of them have high axial rigidity and can handle high axial loads.

CZPT gearboxes

The demand for food has skyrocketed since the turn of the century, and the World Bank estimates that the number of people on the planet will grow by 80 million annually by 2025. As the demand for food grows, agricultural machinery manufacturers are coming up with innovative ways to make the most of their land. This results in shorter cropping cycles and greater wear and tear on farm equipment, including CZPT agricultural gearboxes.
Bevel gearboxes are enclosed straight or spiral gears that transmit rotational power to various parts of agricultural machinery. They are available in a variety of right-angle and spiral configurations. The CZPT Gearbox, for example, features a 68-degree bevel gear drive for augers and grain carts. The company also offers a 50-degree bevel gear drive. These gearboxes are made with the latest technology and incorporate horizontally split housing designs.
Agricultural gearboxes from CZPT are available in a variety of designs, including reversing gears. Reversing gears feature ball bearings that reduce friction and increase efficiency. This gearbox can be purchased in a wide range of power ratings and blade counts, allowing the farmer to choose the one that works best for their needs. This will ensure long-term functionality and effectiveness. So whether you’re a farmer or a manufacturer of agricultural equipment, a CZPT agricultural gearbox will work for you.

Bevel gearboxes with bearings

The bevel gearing is a popular choice for agricultural gearboxes due to its high load capacity. The bevel gearing is widely used in mechanical transmission systems, including agricultural tractors. For modern harvesters, high-performance gearboxes are necessary for smooth operation. Leading agricultural equipment manufacturers rely on CZPT Gearbox Company to provide these high-quality and durable drive systems. This is why we supply bevel gearboxes for agricultural machinery.
A bevel gearbox can be either straight or helical. The latter option is the simplest type and tends to be cheaper to produce. However, it is difficult to realize small profile coverage with straight gearwheels. Furthermore, it is less efficient in transmitting torque. The bevel gearbox can be used for both clockwise and counterclockwise rotation. It is available with a standard mount and aluminum casing.
Depending on the type of agriculture machinery, bevel gearboxes with bearings are suitable for many tasks. Their versatility allows them to be used in a variety of mechanical applications. The double gear allows the upper bevel gear angular gear 2 to pivot relative to the lower bevel gear angular gear 3.
Besides bearings, other factors influence the performance of agricultural gearboxes. Insufficient data may make it difficult to obtain the exact gear. For this reason, a broken gear requires a detailed manufacturing drawing. This drawing requires expertise in technical gear, as well as specialized engineering manpower. It also increases the cost of production. The gears are subjected to heat treatment before being shipped to the customer.
agriculturalparts

Bevel gearboxes with CZPT gearboxes

The demand for agricultural products has increased dramatically since 2010. The world population is increasing at a rapid pace (80 million people per year until 2025), but land is not. Farmers are looking for ways to maximize their land’s potential to grow more food. This increased demand for agricultural machinery is driving the need for highly efficient gearboxes. With replacement parts easily available, manufacturers can meet the growing demand for agricultural equipment.
China ND Agricultural Gearbox for Agriculture Farm Fertilizer Organic Manure Salt Spreader Pto Gear Box Concrete Mixer     with Best Sales China ND Agricultural Gearbox for Agriculture Farm Fertilizer Organic Manure Salt Spreader Pto Gear Box Concrete Mixer     with Best Sales
editor by czh 2022-12-17

China best BAFFERO T Series Right Angle Bevel Gearbox for Parking Lot Bevel Gear Bevel / Miter Cast Iron HT200 20crmnti Alloy Steel OEM,ODM agricultural gearbox for sale

Warranty: 12 months
Applicable Industries: Agriculture, Food, Chemical, Environmental, Paper, sewage treatment, Construction, Parking Lots
Customized support: OEM, ODM
Gearing Arrangement: Bevel / Miter
Output Torque: 10~4000n.M
Input Speed: less than 1800rpm
Output Speed: 300~1800rpm
Gear: Bevel Gear
Gear material: 20CrMnTi Alloy Steel
Gear hardness: HRC58~62
Gear precision: DIN6
Housing material: Cast Iron HT200
Shaft arrangement: customized according to request
Heat treatment: Carburising and Quenching
Oil Seal: NBR rubber
Ratio: 1:1 ~ 1: 5
Certification: CE, ISO9001
Packaging Details: Plywood case
Port: HangZhou & ZheJiang

Products Description Features◆ The world-class eco-design adds luster to your brand image.◆ Various shaft arrangements and ratio to meet your diverse needs.◆ When the ratio is not 1:1 and pinion shaft is input, so cross shaft is reduced output. When cross shaft is input, the pinionshaft is increased output.◆ High precision spiral bevel gear,high efficiency,stable transmission, low noise level, small vibration and strong loadingcapacity.◆ Any mounting position is available.◆ Unique modular design,international production ,faster production and delivery.Product type◆ Mounting mode:foot mounted◆ Shaft arrangement:single input and single output, single input and double output, single input and triple output, double inputand single output.◆ Output shaft: solid shaft Company Profile Workshop & Proessing procedure Certifications Why Us Strictly Quality Control bring Outstand Gearbox products 1: 100% testing for all the gears and Gear shaft and cast Iron Housing 2: 100% Running Test before delivery (Include Oil leak ,Noise and Vibration test3: 100% Appearance checking before packing Strong Production Capability & Advanced equipment & Faster delivery1: More than 150 professional workers & 40000 Squre meter factory base2: Imported Grinding machines(REISHAUER) ,ensure all gears we make are DIN 6 same as.3: Fast delivery (Spare part stock for all series gearboxes)4: 29 years experience since 1993 5: Customized gearbox according to client’s requrement Exhibition Application FAQ 1. How to choose a gearbox which meets our requirement?You can refer to our catalogue to choose the gearbox or we can help to choose when you providethe technical information of required output torque, output speed and motor parameter etc.2. What information shall we give before placing a purchase order?a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information ,etc.b) Housing color.c) Purchase quantity.d) Other special requirements.3. What industries are your gearboxes being used?Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.4. Do you sell motors?We have stable motor suppliers who have been coperating with us for a long-time. They can provide motorswith high quality.

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China best BAFFERO T Series Right Angle Bevel Gearbox for Parking Lot Bevel Gear Bevel / Miter Cast Iron HT200 20crmnti Alloy Steel OEM,ODM     agricultural gearbox for sale	China best BAFFERO T Series Right Angle Bevel Gearbox for Parking Lot Bevel Gear Bevel / Miter Cast Iron HT200 20crmnti Alloy Steel OEM,ODM     agricultural gearbox for sale

China best CZPT Brand Yps 76/90 Gear Box for Parallel Twin Screw Extruder with Best Sales

Item Description

Duoling Brand YPS seventy six/90 Gear Box for Parallel Twin Screw Extruder

Business Data
     Established in 1979, HangZhou Gearbox Producing Co., Ltd.  is positioned in Nationwide Large-tech Advancement Zone of HangZhou, ZheJiang , China.  With more than 38 years’ experience in research and improvement of equipment transmission goods, the factory addresses an region of 87,
Website: jiangchi2012
 
 

 

Specification
Item
76/90 87/100 90/107 95/116 104/120 110/130
Output Speed () 35 – 45
Single Shaft Output Torque
()
5252 5709 8895 9700 11660 15000
Specification
Item
76/90 87/100 90/107 95/116 104/120 110/130
Output Speed () 35 – 45
Single Shaft Output Torque
()
5252 5709 8895 9700 11660 15000

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China high quality syncchrous gear motor 4 rpm 220v 38 shaft worm gearboxes speed reducer gearbox worm gear motor at 4550 gear reducer with Best Sales

Warranty: 3 years
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company
Weight (KG): 50 KG
Customized support: OEM, ODM, OBM
Gearing Arrangement: Worm
Output Torque: 4~2320Nm
Input Speed: 0.28~4.7rpm
Output Speed: 1400rpm(4pole)
Color: RAL9006(grey) OR RAL5571(blue)
Label: Customer requirement
Material of housing: 10-1copper
Input Flange: IEC flange for mounting motor
Customization: Acceptable
Quality Control System: ISO9001:2008
Packaging Details: Carton + Wooden Case

Low cost NMRV series worm gear used marine gearbox for sale,cheap worm gear box prices for textile machinesNMRV090 Used Marine Gearbox
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.
Model No.:NMRV571, Factory Direct Sales Stainless Steel material Shower Door Hardware Round Sliding Glass Door Top Roller NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150Ratio:5,7.5,10,15,20,25,30,40,50,60,80,100Color:Blue(Ral5571)/Silver Grey (RAL9006) Or On Customer RequestMaterial:Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-IronWorm Wheel: ZCuSn10Pb1Worm:20CrPinion:Tin BronzeOutput Shaft: Steel-45#Usages:Industrial Machine: Food Stuff, Ceramics, used 10JSD160 G7492 Transmission Assembly Gearbox for Xihu (West Lake) Dis.feng CZPT truck Chemical, Packing, Dyeing,Wood working, Glass.IEC Flange:IEC Standard Flange Or On Customer Request
Company Information
Quality control
PackingPacking Details: Standard carton/Pallet/Standard wooden case
Delivery Details : 15-30 working days upon payment

Our Certifications

Related Product
Main product list: 16 series including SLR/SLS/SLK/SLF series hard tooth flank gear reducer , SLRC series aluminium case helical gear reducers,SLHSLB series high power speed reducer, SLP series planetary speed reducer, X/B series cycloidal reducer, SLXG series shaft-mounted gear box, SLSWL series worm screw jack, SLT series helical cone gear box, altogether more than 10,000 ratios, various specification make us at the head of domestic transmission industry, widely serve the mechanical transmission field of light & heavy industry such as: beer & beverage, mining machine, food packing, textile printing, rubber & IHSV60-30-40-48-SC High Speed 3000RPM 48VDc Motor Customised Small Motors with brake plastic material, petrochemical industry, jack-up transportation, pharmacy & process hides, environmental protection equipment.
FAQ
1.Payment Term: TT, L/C

2.Delivery time: about 30 days from receive payment.

3.We accept customized products as per your special requirement.

4.Xihu (West Lake) Dis.lines for the Selection:Usually we can select 1 machine which is suitable for you with some informations from you,such as ratio/motor speed/mounting dimension/ out torque etc.

5.If the minimum order amount is in excess of $10000, there are preferential.

Q1: What information should I tell you to confirm the product?
A:Model/Size, Transmission Ratio, Shaft directions & Order quantity.

Q2: What can i do if I don’t know which 1 I need?
A:Dont worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q3: What is your product warranty period?
A:We offer 1 year warranty since the vessel departure date left China.

Q4: Are you trading company or manufacturer ?
A: We are factory.

Q5: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q6: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q7: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.

If you have another question, Greenhouse Manual Film Roll UP Roller Hand Crank For window ventilation system pls feel free to contact us as below:

Contact us

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
gearbox

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
gearbox

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
gearbox

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

China high quality syncchrous gear motor 4 rpm 220v 38 shaft worm gearboxes speed reducer gearbox worm gear motor at 4550 gear reducer  with Best SalesChina high quality syncchrous gear motor 4 rpm 220v 38 shaft worm gearboxes speed reducer gearbox worm gear motor at 4550 gear reducer  with Best Sales